VIOLETT HR active MK II

Application_________________________

VIDEO
BROADCAST
RECORDING
PROJECT STUDIO
MASTERING

Arrangement/Configurations___________

STEREO
SURROUND
ADVANCED SURROUND™
MODUMO™

Features___________________________

2 identical 120W amplifier
eliminates time related distortion


Digital "quick delivery" power supply
Cycles 2000 times faster
hum canceling
Tight and accurate Low End

CARBON Woofer
18cm Carbon/Paper membrane
Resonance free cone

SILK DOME NEODYMIUM Tweeter
28mm Silk dome Neodymium
Superior transient response


Level control
Sensitivity adjustable
-40 to + 10dB

Low-end control
Corrects Low end from -6 to +4dB
Room compensation
Corner/Wall placement Eq

High-end control
Corrects High end from -4 to +4dB
Room compensation
Adjustable (Listening taste)

Download

Product broschure (243kB) engl.

Diagram/Data sheet (629kB) engl.

 


EMES STUDIO MONITOR SYSTEMS
Josef-Drexler-Str. 8
89331 Burgau
GERMANY
Tel: **49-(0)8222-9617072
Fax: **49-(0)8222-965953

  The VIOLETT HR is our recently developed high-resolution
monitor.
With its amazing sonic capabilities and the compact size, the VIOLETT HR active is ideal for the recording and mastering industry as a personal reference monitor. The VIOLETT HR is also suitable for Surround or any other multichannel Set up incl. our ADVANCED SURROUND System!
All high-resolution models use the latest high tech materials available, like carbon or fiberglass! These Fabrics are used in the most critical part of a true sounding monitor system, the moving mechanism!
The Carbon/Paper composite membrane of the 18cm Woofer is produced in a unique way, it's molded and pressed into it's final shape - dried by air - this gives the material it's characteristic Style. The benefit is an extremely light, stable and non-resonant membrane with a nicely controlled dispersion pattern (see Waterfall).
Please note! The moving Part of a speaker translates the electrical signal into a mechanical movement which directly interacts with the Air in front of it! Alternately, you can call it EMtoA-Converter! So any error introduced at this stage means a great loss of information!
The 18cm Carbon driver and the state of the art 28mm neodymium super light silk dome tweeter combined with our new molded waveguide baffel technology allows us to divide the High and Low section at 1200 Hz. This is an important EMES design feature!
Why this low?!

Typically any Konus driver starts to be very uncontrolled between 1000 to 3000 Hz - depending on its diameter and design, so to compensate for this physical characteristic, we have chosen a tweeter that can go down to 1200 Hz.
These unique features and the wave guide design put the VIOLETT HR active, the OWL-System and BLUE HR active into the top Level of today’s monitoring technology!
Only selected, high quality components are used to build our HR monitor's! All controls, x-over, amplifiers (2x 120W) and the new "quick delivery" power supply are assembled on a service friendly and intelligent pc-board.
To adjust our monitors to your personal taste and room acoustics, we have implemented controls for the low frequency (± 6dB) and for the high frequency (± 4dB) section, as well as controls for input sensitivity (balanced, unbalanced ± 15dB).
All EMES monitors use a PTZ-protection circuit to guard the hf-drivers from over heating at high listening levels.
All of them are fixed valued Dip-Switches! So every Monitor can be set identical within minimized tolerances important for Stereo-, 5.1 and Advanced Surround™ Systems.
We ship all our monitors as matched pairs with less than ±0,5 dB difference!

Due to our MODUMO™ concept the performance of the VIOLETTs can be easily expanded!

We ship the VIOLETTs as all other EMES monitors as matched pairs!


2 way electronic Dip-SwitchesLiquid baffledigital "quick delivery"powersupplyCarbon driverISO-RAILs

 

VIOLETT HR active MK II  
construction 2 way bass-reflex 
concept One & One Monitor with Wave-guide 
fc responce free field 48 - 20.000 Hz +/- 2 dB 
fc responce in wall 50 - 20.000 Hz +/- 1,5 dB 
system low fc responce 46 Hz - 3 dB 
max. sensitivity 109 dB 
max. sensitivity long term 106 dB 
harmonic distortion at SPL <100Hz 0,8 % 
harmonic distortion at SPL >100Hz 0,35 % 
Bass driver 1 x 18cm, carbon 
Midrange driver
Hf driver 28mm Silk Dome Neodymium 
shielded (anti magnetic) no
weight 9,4 Kg 
dimensions w/h/d in mm 210 x 380 x 250 mm 
pair difference +/- 0,5 dB 
VIOLETT HR active MK II - Electronic  
number of amplifier
power handling rms Lf/Hf
2 x 100 W
power handling peak Lf/Hf
2 x 120 W
connector type
XLR (female) 
input impedance
10 kOhm 
input sensitivity
16 steps, from 0,45 - 4,5V 
X-over fc
1,300 Hz 
low pass filter
35 Hz / - 18dB 
Hf level control
16 steps, from -4 dB - + 4 dB 
Lf gain control
16 steps, from -6 dB - + 8dB 
distortion at acoustic max. output
0,1% 
signal to noise ration
-106 dB 
kind of power supply
digital 
operating voltage
115/230 V +/- 20% 
power consumtion at max. output
160 W